Hybrid floorings are created with the purpose of easy installation. They are lightweight enough for their strong build quality and durability. Their increasing popularity is proof of it.
With a bit of knowledge and understanding of the installation process, you can do it on your own. In this article, we will provide you with all the information so that you can DIY it in your house. So let’s get started with our “beginners guide to hybrid flooring installation”.
1. Choose The Right Flooring For Your Home
To begin with the process you must decide which hybrid flooring is the best for your home. There are quite a few variants available for you to choose. Then there are different styles and patterns available for the final look also. So you must get the details of each of these from the brand itself. Depending on your budget, personal style, and the longevity of the flooring material you will be able to choose the right flooring material for yourself.
2. Measurement
With measuring your floors the actual process of hybrid flooring installation starts. Take proper measurements of all the rooms and spaces where you wish to install the flooring.
Do not forget to add the extra space in the corners for a complete look. If you are struggling to measure the floors properly due to complicated geometry seek professional help. Your local hybrid flooring installers will give you the correct measurements. This determines the quantity of material you require to get your job done.
3. Subfloor Preparation
In simple words, the subfloor is nothing but the raw floor bed on which you will mount the hybrid flooring materials. For a successful mount, you need a clean, dry, dust-free floor. Make sure to remove any old carpet remainings, screws, nails, polishes, etc. to create a smooth and bump-free subfloor.
4. Let The Materials Acclimate
It is advised that you let the freshly bought floor materials acclimate with your rooms’ environment before installation. Ideally, most brands recommend that you let them sit on your room’s floor for at least 48 hours. This allows the materials to get adjusted to the natural weather conditions such as cold, heat, humidity, wind, sunlight, etc. in your rooms.
5. Arrange Required Tools
While the materials acclimate themselves you can utilise this time to prepare for the next steps. To install them you will need a saw, spacers, a utility knife, a tapping block, a pull bar and a straight edge. These are the essential tools. You may also need a drilling machine, jigsaw, nail gun etc. depending on your home’s floor requirements.
6. Follow The Brand’s Manual
Depending on your material you will be handed over a manual by the manufacturer. Before you begin, read the manufacturer’s manual thoroughly. They mention all the necessary steps to follow for a perfect installation.
7. Get Professional Help
If you struggle with handling the tools, understanding the instructions or you simply need a helping hand seek professional help to ensure proper installation.
Conclusion
By now you already know the entire process. It is easy, simple and short. In case you need professional support go to Timbex Flooring. Not only flooring materials but they also have the best hybrid flooring installers in Rockingham. Connect with Timbex Flooring today for all your flooring needs.
